Workflow Won't Start

Symptoms

• Click Run but nothing happens
• “Cannot start workflow” error
• Workflow stuck in “Starting” state
• Play button doesn’t respond

Quick Checklist

Check	Status
Device connected?	🟢 Must show “Connected”
Device selected?	Must be set as active device
Workflow valid?	No red error indicators
Instagram installed?	On the connected device
Previous workflow finished?	Can’t run two simultaneously

1. Verify Device Connection

1. Go to Devices panel
2. Confirm device shows 🟢 Connected
3. If not, reconnect device first
4. Set device as active if needed

2. Check Workflow Validity

Your workflow may have errors:

1. Look for red warning icons on any nodes
2. Check that all nodes are connected
3. Verify Start node connects to first action
4. Ensure workflow ends at End node
5. Check for missing required configurations

3. Save Workflow First

Unsaved changes can cause issues:

1. Press Ctrl+S or click Save
2. Wait for “Saved” confirmation
3. Try running again

4. Check Module Configurations

Click on each node and verify:

• Required fields are filled
• Account is selected (where applicable)
• Values are within valid ranges

5. Close Previous Execution

If a previous workflow is stuck:

1. Click Stop in the execution monitor
2. Wait for complete stop
3. If stuck, use Force Stop
4. Try running again

6. Restart FeedFlux

Sometimes a fresh start helps:

1. Close FeedFlux completely
2. Wait 10 seconds
3. Reopen FeedFlux
4. Reconnect device
5. Try running workflow